水圧と流量の関係 / Relation between Pressure and Spray Volume
| 型番 Model No. |
水圧 Pressure MPa(0.1MPa≒1kg/cm²) |
|||
|---|---|---|---|---|
| 0.1 | 0.2 | 0.3 | 0.4 | |
| QN-P2M0040-XX | 4.0 | 6.0 | 7.6 | 9.2 |
| QN-P2M0050-XX | 5.0 | 7.5 | 9.5 | 11.5 |
| QN-P2M0062-XX | 6.2 | 9.5 | 12.0 | 14.1 |
| QN-P3M0080-XX | 8.0 | 12.2 | 15.5 | 18.2 |
| QN-P3M0098-XX | 9.8 | 14.9 | 18.9 | 22.2 |
| QN-P3M0115-XX | 11.5 | 17.7 | 22.4 | 26.3 |
| QN-P3M0133-XX | 13.3 | 20.4 | 25.8 | 30.4 |
| QN-P3M0151-XX | 15.1 | 23.1 | 29.3 | 34.5 |
| QN-P3M0169-XX | 16.9 | 25.8 | 32.7 | 38.5 |
| QN-P3MG0180-XX | 18.0 | 27.0 | 34.2 | 41.4 |
| QN-P3MG0200-XX | 20.0 | 30.0 | 38.0 | 46.0 |
- XXは装着するパイプに応じて以下の数字となります。
1″用：08、1･1/4用：10、１･1/2″用：12、2″用：16 - 材質：＜クリップ部＞PP及びSUS、＜パッキング＞ブナN、＜ノズレス＞PPS（耐熱エンプラ）
- オプション：強い薬品にはバイトン（フッ素系）製パッキング
- すでに21/32″穴があいている場合には専用パッキング（ブナN製及びバイトン製）をご利用ください。
- 2.0・/min（1kg/cm²時）の少量吐出タイプも製作可能です。
- XX is a number corresponding to the diameter of a pipe attaching to a quick nozzlless. Its correspondence is as follows;
08 for 1" pipe, 10 for 1･1/4" pipe, 12 for １･1/2" pipe, 16 for 2" pipe - Material: Clip Part: PP and Sus, Packing part: Buna N, Nozzlless Part: PPS (heat-resisting engineering plastic)
- Option: For the use of strong chemicals, Viton packing (fluorine system) is recommended.
- Please use a custom-made packing (made of Buna N and Viton) in case of attaching to a pipe with a 21/32" already existing hole.
- We can custom a quick nozzlless for smaller spraying volume (2.0・/min in case of 1kg/cm²）
About 55 mm (from the outer circumference to the center of the spray outlet)
あっという間に目詰まりのないシステムに変身できます！！
A spray system can be instantly changed to a shower system without clogging.
NOZZLLESSはコーテック（株）、Clip-EyeletはSpraying Systems社、バイトンはDuPont社の登録商標です。
NOZZLLESS is a registered trademark owned by Cotec Co., Ltd.
Clip-Eyelet is a registered trademark owned Spraying Systems Co., Ltd.
Viton is a registered trade mark owned by DuPont Co., Ltd.
